Development of Tractor Drawn Potato Digger

Authors

  • Gosa Bekele Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia
  • Degefa Woyessa Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia https://orcid.org/0000-0002-6326-8608
  • Abulasan Keberedin Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia
  • Ashebir Tsegaye Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia
  • Wabi Tafa Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia
  • Abdissa Teshoma Oromia Agricultural Research Institute (IQQO), Asella Agricultural Engineering Research Center, Arsi, Oromia, Ethiopia

DOI:

https://doi.org/10.54536/ari.v3i1.3375

Keywords:

Digger, Exposing Efficiency, Harvesting Efficiency, Performance Parameter, Potato

Abstract

The post-harvest loss of potatoes in Ethiopia is more than 25% which includes harvesting loss. In the conventional method, the potato is harvested either manually with a hand hoe or by animal-drawn equipment, which is a tedious, labor-intensive, and time-consuming operation. To overcome these problems, the tractor-drawn potato digger was developed, and evaluated for its performance. The performances were evaluated in terms of harvesting efficiency, exposing efficiency, percentage of tuber damage, effective field capacity, field efficiency, and fuel consumption. The developed digger is tested at three levels of forward speeds (2.5, 3, and 3.5 km/h) and three different rake angles (10, 15, and 20°). The performance of the digger was found to be optimum at rake angles of 20° and forward speed of 2.5 km/hr. The results revealed that maximum harvesting efficiency of 98.21% was obtained with lower potatoes damage of 4.32% whereas the exposing efficiency, undug potatoes, effective field capacity, field efficiency, and fuel consumption were found to be 91.48%, 1.79%, 0.11ha/hr, 84.71%, and 1.17 l/hr, respectively. The analysis of variance revealed that forward speed and rake angle had significant effects on harvesting efficiency, undug potatoes, potato damage, effective field capacity, field efficiency, and fuel consumption at a (P<0.05) level of significance. The costs of harvesting per hectare were 2876 and 6050 ETB/ha for the developed potato digger and traditional potato digging methods, respectively. The cost of operation per hour for tractor-drawn potato diggers and traditional methods was 169.23 and 700 ETB/hr, respectively. The saved cost of harvesting was 52% and the saved in time was 75% compared to traditional potato harvesting. From these performance indicators, it can be concluded that this digger is efficient, effective, and economical, and it is recommended that the technology be promoted for potato producer farmers.

References

Al-Jubouri, K. A. J., & McNulty, P. B. (1983). Potato Damage and Losses as Influenced by Vibratory Digging. Irish Journal of Agricultural Research, 22(2), 243–253.

Arthur, W., Richard, S., Moses, K., Joyce, B., David, C., Kenneth, W., Robert, G., & Lawrence, O. (2017). Expanding Utilization of Roots, Tubers, and Bananas and Reducing Their Postharvest Losses Technical report: Improved potato harvesting techniques.

Asheesh-Kumar, V., Sharma, S., & Kumar, A. (2017). Design and Development of Automatic Potato Planter for Mini Tractor. International Journal of Scientific & Engineering Research, 8(7), 13–28.

Ayandiji, A., Adeniyi, O. R., & Omidiji, D. (2011). Determinant Post-harvest losses among tomato farmers in Imeko-Afon Local Government Area of Ogun State, Nigeria. Global Journal of Science Frontier Research, 11(5), 23–28.

Ayalew, T., Paul, C. S., & Hirpa, A. (2014). Characterization of seed potato (Solanum tuberosum L.) Storage, pre-planting treatment, and marketing systems. The case of West Arsi. Afr J Agric Res., 9(15), 1218–1226. https://doi.org/10.5897/ajar2013.8572

Babalola, D. A., & Agbola, P. O. (2008). Impact of malaria on poverty level: evidence from rural farming households in Ogun State, Nigeria. Babcock J. Econ. Finance, 1(1), 108–18.

Bezabih, E., & Mengistu, N. (2011). Potato Value Chain Analysis and Development in Ethiopia; Case of Tigray and Southern Nation Nationality and People Regions (pp. 26-27). International Potato Center (CIP-Ethiopia), Addis Ababa, Ethiopia.

BoFED (Bureau of Finance and Economic Development). (2007). Annual statistics for Amhara National Regional State. Bahir Dar, Ethiopia.

CSA (Central Statistical Authority of Ethiopia). (2015). Report on Area and Production of Major Crops, Private Peasant Holdings, Meher Season. Addis Ababa, Ethiopia.

CSA (Central Statistical Authority of Ethiopia). (2019/20). Report on area and production of major crops (Volume 1). Statistical Bulletin 590. Addis Abeba, Ethiopia.

Devaux, A., Kromann, P., & Ortiz, O. (2014). Potatoes for Sustainable Global Food Security. Potato Research, 57(3–4), 185–199. https://doi.org/10.1007/s11540-014-9265-1

DOA (District Office of Agriculture). (2016). Reports of Shashemene district office of Agriculture. Shashemene, Ethiopia.

EIA (Ethiopia Investment Agency). (2012). Investment Opportunity Profile for the Production of Fruits and Vegetables in Ethiopia. Addis Ababa, Ethiopia.

Huang, W., Marutani, H. K., Vieth, G. R., & Keeler, J. T. (1979). Calculating Costs of Using Farm Machinery : A Standardized Procedure for Hawaii. Hawaii Agricultural Experiment Station, College of Tropical Agriculture and Human Resources, University of Hawaii, 1–17.

Ibrahim, M. M., Amin, E., & Farag, A. (2008). Developing a Multipurpose Digger for Harvesting Root Crop Diggers. Misr Journal of Agricultural Engineering, 25(4), 1225–1239. https://doi.org/10.21608/mjae.2008.158092

Kepner, R. A., Bainer, R., & Barger, E. L. (2005). Principle of Farm Machinery (3rd ed.). New Delhi: CBS Publishers & Distributors Pvt. Ltd.

Khura, T. (2008). Design and Development of Tractor Drawn Onion Digger. Doctoral dissertation, Indian Agricultural Research Institute, New Delhi, India.

Narender, Rani, V., Mukesh, S., Kumar, A., & Sharma, P. (2019). Optimization of Performance Parameters of Root Crop Digger for Potato Crop. Current Agriculture Research Journal, 7(2), 276–282. https://doi.org/10.12944/carj.7.2.16

Nkakini, S. O., Akor, A. J., Ayotamuno, J., Ikoromari, A., & Efenudu, E. O. (2010). Field performance evaluation of manual operated petrol engine powered weeder for the tropics. Agricultural Mechanization in Asia, Africa & Latin America, 41(4), 68-73

Oyekanmi, M. O. (2007). Determinants of postharvest losses in tomato production: a case study of Imeko Afon Local Government Area of Ogun State. Department of Agriculture, Babcock University, 14–18.

Singh, S. (2006). Design, Development, and Field Testing of a Multipurpose Potato Digger. Potato Journal, 33(3-4), 134–138.

Yasin M., Ahmed, M. M. & Rehman, R. (2003). Design, Development, and Performance Evaluation of Rotary Potato Digger. Agricultural Mechanization in Asia Africa and Latin America, 34(2), 43-46.

Published

2025-01-13

How to Cite

Bekele, G., Woyessa, D., Keberedin, A., Tsegaye, A., Tafa, W., & Teshoma, A. (2025). Development of Tractor Drawn Potato Digger. Applied Research and Innovation, 3(1), 1–13. https://doi.org/10.54536/ari.v3i1.3375