Crushing Power of a Corn Cob Chopping Machine for the Manufacture of Animal Feed at the Cinagarabogo People’s Livestock Centre, Subang Regency, Indonesia

Authors

  • Ferdi Fathurohman Agroindustry Department, Subang State Polytechnic, Arif Rahman Hakimt, Subang, West Java, Indonesia https://orcid.org/0000-0002-2609-5277
  • Adhan Efendi Mechanical Engineering Department, Subang State Polytechnic, Arif Rahman Hakimt, Subang, West Java, Indonesia
  • Ridwan Baharta Agroindustry Department, Subang State Polytechnic, Arif Rahman Hakimt, Subang, West Java, Indonesia

DOI:

https://doi.org/10.54536/ajaset.v7i1.1153

Keywords:

Corn Cob, Disc Mill Machine, Ruminant Feed

Abstract

Process of making animal feed at the People’s Husbandry Centre (SPR) Cinagarabogo Subang Regency is one of the producers of ruminant animal feed for cattle. The ruminant feed made from corncob waste is distributed to cattle breeders in Subang Regency. The manufacture of animal feed made from corn cobs is still done conventionally, so that the fulfilment of ruminant feed needs is often hampered. This study aimed to design a disc mill machine that is used to crush corn cobs. The research method started from observing, sketching, making 2D and 3D designs, and conducting expert validation. Based on the research, it can be concluded that the design made has been declared valid with a score of 87% or was in the proper category. Further recommendations that the design is feasible to proceed to the manufacturing process.

Downloads

Download data is not yet available.

References

Ditjen, P.K.H. (2015). Pedoman Sentra Peternakan Rakyat (SPR). Direktorat Jenderal Peternakan dan Kesehatan Hewan. 1–32

Efendi, A., & Suhartono, R. (2018). Corn Cob Disc Mill Machine Repair And Maintenance. Journal Rekayasa Mesin, 13(3), 97104. https://doi.org/10.32497/rm.v13i3.1281

Efendi, A., & Suhartono, R. (2019). Maintenance of Disc Mill Machines of the People’s Livestock Center (SPR) Chinagarbogo. SINTEK JURNAL: Journal Ilmiah Teknik Mesin, 13(1), 44–50. https://doi.org/10.24853/sintek.13.1.44-50

Fathurohman, F. (2019). Subang Regency Livestock Area Business Model. Journal Ilmiah Ilmu Dan Teknologi Rekayasa, 1(1), 35–44. https://doi.org/10.31962/jiitr.v1i1.53

Fathurohman, F., & Baharta, R. (2020). Analisis Kelayakan Usaha Pembuatan Pakan Ternak Komplit Dengan Mekanisasi Skala Kelompok Di Kabupaten Subang. Journal Agribisnis Terpadu, 13(1), 58. https://doi.org/10.33512/jat.v13i1.6774

Fathurohman, F., Purwasih, R., & Mukminah, N. (2022). Development of Beef Cattle Agribusiness in the Rubber Plantation Farming System in the Community Livestock Center Area , West Java Indonesia. American Journal of Aquaculture and Animal Science, 1(1), 38–45. https://doi.org/10.17605/OSF.IO/AU76Q

Fathurohman, F., Sobari, E., & Safitri, F. A. (2017). Human Resources Development Strategy In Brucellosis Diseases Monitoring At Sentra Peternakan Rakyat Cinarabogo, Subang. Advances in Health Sciences Research (AHSR), 5, 169–173. https://doi.org/10.2991/icoh-17.2018.33

Jibrin, M. U., Amonye, M. C., Akonyi, N. S., & Oyeleran, O. A. (2013). Design and Development of a Crop Residue Crushing Machine. International Journal of Engineering Inventions, 2(8), 28–34. www.ijeijournal.com

Kruszelnicka, W., Hlosta, J., Diviš, J., & Gierz, Ł. (2021). Study of the relationships between multi-hole, multi-disc mill performance parameters and comminution indicators. Sustainability (Switzerland), 13(15), 12–15. https://doi.org/10.3390/su13158260

Nandiyanto, A. B. D., Ragadhita, R., Sukmafitri, A., Bilad, M. R., Aziz, M., & Yunas, J. (2020). Mechanical impact in disk mill for producing controlled rice husk particle size by changing impactor shapes and disk rotation speeds. Sains Malaysiana, 49(12), 2927–2940. https://doi.org/10.17576/jsm-2020-4912-05

Nauval, M. I., Faoji, A., & Syarifudin. (2018). Design of Corn Grain Grinder into Flour Disk Mill Machine Type FFC 15 [Politeknik Harapan Bersama]. In Angewandte Chemie International Edition, 6(11), 951–952. https://doi.org/http://eprints.poltektegal.ac.id/id/eprint/724

Rangkuti, P. A., Hasbullah, R., & Sumariana, K. S. U. (2012). Disc Mill Performance Test for Juwawut (Setaria italica (L.) P. Beauvois). AgriTECH, 32(1), 66–72. https://doi.org/10.22146/agritech.9658

Widiati, R. (2014). Developing Beef Cattle Industry at Smallholders to Support Beef Self-Sufficiency. WARTAZOA, 24(4), 191–200. https://doi.org/http://dx.doi.org/10.14334/wartazoa.v24i4.1090

Downloads

Published

2023-01-19

How to Cite

Fathurohman, F., Efendi, A., & Baharta, R. (2023). Crushing Power of a Corn Cob Chopping Machine for the Manufacture of Animal Feed at the Cinagarabogo People’s Livestock Centre, Subang Regency, Indonesia. American Journal of Agricultural Science, Engineering, and Technology, 7(1), 16–20. https://doi.org/10.54536/ajaset.v7i1.1153

Issue

Vol. 7 No. 1 (2023): American Journal of Agricultural Science, Engineering, and Technology

Section

Research Articles

License

Copyright (c) 2023 Ferdi Fathurohman, Adhan Efendi, Ridwan Baharta

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.