Tensegriture: Integrating Tensile Integrity into Furniture to Reduce Earthquake Damage

Authors

  • Dessa Bulaong Dr. Yanga's Colleges, Inc., Philippines
  • Andreus Rodge S. Cordova Dr. Yanga's Colleges, Inc., Philippines
  • Alvin S. Eusebio Dr. Yanga's Colleges, Inc., Philippines
  • Princess Elise R. Fernando Dr. Yanga's Colleges, Inc., Philippines
  • Thimothy James R. Marquez Dr. Yanga's Colleges, Inc., Philippines
  • Clark Kent S. Santiago Dr. Yanga's Colleges, Inc., Philippines
  • Asly Danaya M. Santos Dr. Yanga's Colleges, Inc., Philippines
  • Maria Isabelle D.C. Santos Dr. Yanga's Colleges, Inc., Philippines
  • Mary Grace Delos Santos Dr. Yanga's Colleges, Inc., Philippines

DOI:

https://doi.org/10.54536/ajise.v2i3.1921

Keywords:

Tensegrity, Furniture, Earthquake-Resistant, Earthquake Damage Reduction

Abstract

Few furniture designs are built around the concept of withstanding earthquakes. This capstone project aims to integrate tensegrity into furniture to replicate the earthquake safety measures used on larger scales with seismic isolation and withstand earthquakes better than traditional furniture. The researchers tested the product at the Philippine Institute of Volcanology and Seismology (PHIVOLCS), located at Diliman, Quezon City. The researchers made use of the institute’s earthquake simulator to have the earthquake intensities scaled accurately. They made use of true experimental research design, which gave them access to the scientific method in making the designs for the furniture. The researchers conducted the experiment in four phases, denoted as the research phase, the design phase, the experiment phase, and the evaluation phase. The results showed that the calculated t-value of 35.317 is greater than the critical t-value of 2.56. This meant that tensegrity-integrated furniture is significantly more earthquake-resistant than traditional household furniture. Measures such as adding weights to the structure’s base increase further increase its stability. Tensile integrity integrated into furniture is a modern take on earthquake safety measures, similar to existing ones like seismic isolation. And with the proper setup and more improvements, its earthquake resistance factor can save lives.

Downloads

Download data is not yet available.

References

Altovar, A. T. (2017). Escaping the danger zone: Proposed earthquake evacuation route for selected Southern Luzon State University buildings.

ANI, KITE E-Learning Solutions, Inc. (n.d.). E-Journal, 3(1), (2016) Ani: Letran Calamba Research Report A.Y. 2014 2015.

Antoniou, S. (2023). Seismic Retrofit of Existing Reinforced Concrete Buildings.

Baquiran, J. R., Barbadillo, A. P., Baroña, M. T., Castillo, B. C., Castro, C. G., Chan, L. A., Cheng, C. E., Ching, M. D., Chio, E. V. & Chong, C. C. (2017). A cross-sectional descriptive study on the earthquake preparedness of selected highly vulnerable barangays in Metro Manila. Health Sciences Journal, 6(1).

Bevans, R. (2022). Guide to Experimental Design| Overview, 5 steps & Examples. Scribbr.

Bhandarkar, T., K, V., Satish, N., Sridhar, S., Sivakumar, R., & Ghosh, S. (2019). Earthquake trend prediction using long short-term memory RNN. International Journal of Electrical and Computer Engineering, 9(2), 1304. https://doi.org/10.11591/ijece.v9i2.pp1304-1312

BigRentz. (2022). How Earthquake-Proof Buildings Are Designed. BigRentz.

Butler, P. (2021). How to Make an Earthquake Proof House. Jumpstar.

California Earthquake Authority. (2020). Earthquake Damage, Danger & Destruction.

Causapin, H. A. (2018). Semi-Markov chain modeling on earthquake occurrences in selected areas in Luzon. Tilamsik, 10(1).

Centeno, E., Daya, R. & Muya, G. (2022). Communication and Risk Reduction Behavior of Residents in Selected Disaster-Prone Communities in the Philippines. 3. 40-52.

David, T. (2022, November 9). How to Design and Understand Unusual Tensegrity Structures. Ansys.

Fellin, M., Polidori, M., & Ceccotti, A. (2022). Cross Laminated Timber furniture providing shelter during earthquakes. Lifeshell public domain release. Interdisciplinary Perspectives on the Built Environment, 2.

Geller, R. J., Jackson, D. A., Kagan, Y. Y., & Mulargia, F. (1997). Earthquakes Cannot Be Predicted. Science, 275(5306), 1616.

Goyal, R., Chen, M., Bhattacharya, R., & Skelton, R. E. (2019). MOTES: Modeling of Tensegrity Structures. Journal of Open Source Software, 4(42), 1613.

Halvorsein, C. (2021) Working Load Limit, Breaking Strength & Safety Factor: What Do They Mean. US Cargo Control.

Hussein, S. & Hussain, M. (2017). The strategies of architectural design resisting earthquake in Tall buildings. 20. 436-445.

Isobe, D., Yamashita, T., Tagawa, H., Kaneko, M., Takahashi, T., & Motoyui, S. (2018). Motion analysis of furniture under seismic excitation using the finite element method.

Joffe, H., Rossetto, T., Bradley, C., & O’Connor, C. (2018). Stigma in science: the case of earthquake prediction. Disasters, 42(1), 81–100.

Kelety, J. (2023, March 2). Experts: Earthquakes can’t be predicted. AP NEWS.

Limlengco, J. M., Centeno, J. D. & Ferrera, F. C. (2016). A disaster route simulator for Letran, Calamba Using A* Algorithm For Android. Ani: Letran Calamba Research Report, 3(1).

Luna, E. (2021). Seismic Isolators: An anti-seismic technology to earthquake-proof buildings. Manila Bulletin.

N. Singh, A. A. (n.d.). Computational modeling of the seismic response of tensegrity dissipative devices incorporating shape memory alloys. Scipedia.

Limlengco, J. M., Centeno, J. D. & Ferrera, F. C. (2016). A Disaster Route Simulator for Letran Calamba Using A* Algorithm for Android. Ani: Letran Calamba Research Report, 3(1).

Naval, R. C. & Carig, E. T. (2017). Estimating Risks: A Case of Rapid Earthquake Damaged Assessment System (Redas) Application in The Province of Quirino. QSU Research Journal, 6(1).

Ogata, Y. (2017). Statistics of Earthquake Activity: Models and Methods for Earthquake Predictability Studies. Annual Review of Earth and Planetary Sciences, 45(1), 497–527.

Palmieri, M. G. (2021). “Floating-bending tensile-integrity structures” Curved and Layered Structures. 89-95.

Palomares, A., Hernández-Montes, E., & Gil-Martín, L. M. (2022). Topological design of the octahedron tensegrity family. Engineering Structures, 259, 114211.

Rosenau, M., Corbi, F., & Dominguez, S. (2016). Analogue earthquakes and seismic cycles: experimental modelling across timescales. Solid Earth, 8(3), 597–635.

Rzeszów, Z. B. (2019). Seismic Isolator. Techbriefs.

Shuo Ma, M. C. (2022, January). Tensegrity system dynamics based on finite element method, Composite Structures.

Singh, N. A. (2020). Mechanical response of tensegrity dissipative devices incorporating shape memory alloys. IOP Conference Series.Materials Science and Engineering.

Springer, M. (2018). Home Preparedness in Earthquake Country. Blogspot.

Zhao, X., Pan, S., Sun, Z., Guo, H., Zhang, L., & Feng, K. (2021). Advances of Satellite Remote Sensing Technology in Earthquake Prediction. Natural Hazards Review, 22(1).

Downloads

Published

2023-09-06

How to Cite

Bulaong, D., Cordova, A. R., Eusebio, A. S., Fernando, P. E., Marquez, T. J., Santiago, C. K., Santos, A. D., Santos, M. I., & Delos Santos, M. G. (2023). Tensegriture: Integrating Tensile Integrity into Furniture to Reduce Earthquake Damage. American Journal of Innovation in Science and Engineering, 2(3), 15–25. https://doi.org/10.54536/ajise.v2i3.1921