Submissions

Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • Article not published or submitted elsewhere.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in Microsoft Word document file format.
  • There is no conflict of interest.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 10-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the main text, not at the end.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.
  • Provide two reviewers name from the same research area of submitting article.
    Name:
    Designation:
    Organization (University/researcher organization/etc.):
    E-mail:
    URL (If any):

Author Guidelines

Note: We Do not charge any submission, processing, or publication fees due to Pandemic

Organization of Manuscript

The manuscript should contain the items mentioned hereunder.

Title, List of authors together with affiliations

  1. Abstract and Keywords
  2. Introduction
  3. Literature Review
  4. Materials & Methods
  5. Results & Discussion
  6. Conclusion
  7. Acknowledgments (optional)
  8. References
  9. Annexures (optional)

Language:

The language of the manuscript must be in English.

Length of Paper

The length of the paper should be between 7000 - 10000 words (including list of references and annexures) and paper containing more than 10000 words will be rejected. Articles should be typed using 10 font size (Times New Roman) in 1. 5 space on one side of A4 paper with normal margins (Top 1”, Bottom 1”, Left 1” and Right 1”). Authors are urged to write as concisely as possible, but not at the expense of clarity.

Title Page

The title page is a separate page before the text. It should include the following information:

Title

The title should be concise and informative. Abbreviations and formulae should be avoided where possible.

Author’s Names and Affiliations

Indicate the initials and then the last name. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name and the e-mail address of corresponding author.

Corresponding Author

Indicate who is willing to handle correspondence at all stages of refereeing, publication, and also post-publication. Ensure that telephone numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.

Abstract

A concise and factual abstract is required (maximum length of 350 words). The abstract should state briefly the purpose of the research, the principal results, and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. References should be avoided in the abstract. Please make text indentation left 0.2 and right 0.2.

Keywords

Immediately after the abstract, a maximum of 5 keywords, avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of') should be provided. Keywords should be presented. The keywords should be arranged in alphabetical order.

Introduction

This section should be concise, with no subheadings, and provide a background to the research problem, present the research problem with sufficient justification and objective/s.

Literature Review

This section should provide a sufficient evaluation of theoretical/empirical literature to identify knowledge gaps.

Materials and Methods

This section should contain adequate and detailed information about all the procedures and steps followed.

Results and Discussion

This section should be described on the results and outputs of the research work.

Conclusions

This should clearly explain the important conclusions of the work highlighting its significance, relevance, and values.

Table and Figures

Please note that the article will be published in black and white. Present tables and figures within the article, not at the end of the article. Tables should be numbered consecutively using Arabic numbering (Table 1, Table 2, etc.) and must have corresponding references in the main text. Tables should also have appropriate and concise headings. All figures and illustrations, as in the case of tables, should be numbered consecutively as ‘Figures’ (Figure 1, Figure 2, etc.) with corresponding references in the main text. Figures should also have appropriate and concise headings.

Acknowledgments

If the research is sponsored or supported by an organization, please indicate it.

Reference: Authors are requested to follow Apa format of referencing.

  • Important: Please carefully check your assignment instructions, or with your lecturer, any specific referencing requirements.
  • Begin your reference list on a new page and title it References, then centre the title on the page.
  • Double-space your reference list and have a hanging indent
    • Left align the first line of each reference with subsequent lines indented to the right to a width by    
      5 -7 spaces or 1.25 cm.
  • All of the references in the reference list must also be cited in the text.
  • All references cited in text must also be included in the reference list (unpublished items, such as personal
    correspondence, are an exception).
  • List the references in alphabetical order by author surname/family name according to the first listed author. (Note: the order of the authors on a document is important do not rearrange them)
  • Where there are two articles with the same authors and date, order the references alphabetically by article title and add a letter suffix to the year of publication (e.g. 2003a, 2003b...).
  • Provide organisation names in full, unless they are obviously recognisable as abbreviations (e.g. APA for American Psychological Association).
  • Do not add full stops to URLs (e.g. http://www.lib.monash.edu.au/)
  • In an article, chapter or book title capitalize only the first word of the title and of the subtitle, if any, and any proper nouns. (Note: book titles should be italicised)
  • In a periodical, journal, or serial title, give the title in full, in upper and lower case letters. The title should be italicised (e.g. Harvard Business Review)
  • APA requires use of an en dash between pagination numbers. An en dash is longer and thinner than a hyphen. Type in an en dash, or if an en dash is unavailable on the keyboard, use a single hyphen. In either case there is no space before or after. We recommend consulting your faculty staff to determine their requirements.
  • Check the reference details against the actual source - you are indicating that you have read that source when you cite it.
  • Be consistent with your referencing style across the document.
  •  

List references in alphabetical order. Each listed reference should be cited in text, and each text citation should be listed in the References section.

Examples of basic reference formats:

  • Journal Article:
    Hughes, G., Desantis, A., & Waszak, F. (2013). Mechanisms of intentional binding and sensory attenuation: The role of temporal prediction, temporal control, identity prediction, and motor prediction. Psychological Bulletin, 139,133–151. http://dx.doi.org/10.1037/a0028566
  • Authored Book:
    Rogers, T. T., & McClelland, J. L. (2004). Semantic cognition: A parallel distributed processing approach.Cambridge, MA: MIT Press.
  • Chapter in an Edited Book:
    Gill, M. J., & Sypher, B. D. (2009). Workplace incivility and organizational trust. In P. Lutgen-Sandvik & B. D. Sypher (Eds.), Destructive organizational communication: Processes, consequences, and constructive ways of organizing(pp. 53–73). New York, NY: Taylor & Francis.

Research Articles

The journal emphasized research, development and application within the fields of agricultural engineering, science and technology. The journal publishes articles include those containing substantial supported theories, innovative works, substantial experimental results and/or containing useful and constructive discussions standardized to regional or international acceptance.

The subjects covered by the journal includes but not limited to:

 

Agriculture Dental and Medical Science
Agricultural Economics and Agri-business Experimental Agriculture
Agricultural Engineering Food science, Engineering and Technology
Agricultural Statistics Genetics Technology
Agricultural Extension and Development Geophysics
Agroforestry and Ecotourism GIS, GPS, and Remote Sensing
Agronomy Horticultural Science
Agro-tourism ICT for Agricultural Development
Animal Science and Nutrition Irrigation and Water Resource Engineering
Applied Agriculture Land Use and Development
Applied Economics and Finance Mathematics
Aquaculture Modeling of Crop and Animal System
Bioinformatics Pathology and Plant Protection
Biotechnology and Biochemistry Fisheries
Climate Change and Green Technology Plant Breeding and Crop Science
Collaborative Engineering Post-harvesting Technique and Technology
Computer Science and Engineering Precision Agriculture
Computational Biology Production Engineering
Crop Science and Production Social Science and Agricultural Development
Dairy Science & Poultry Science Soil Science
Decision Support System Tropical Agriculture
Entomology Veterinary Science and Technology
Environmental Science and Extension

Review Article

The Editors of Journal encourage the publication of scholarly review articles in the Journal.  

Short Communication

Short communications are short articles (mini original articles) that present original and important preliminary findings that do not warrant publication as a full-length article but are still worthy of publication. The main text should be sub-divided into background, methods, results, and discussion, but should be written as concisely as possible.

Scientific Reports

Policy will be updated.

Case Study

The Editors are encouraging author to publish case study. 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.